BE-FORM F1 75 - Single Sided Fusible Foam Stabilizer (W)75cm

INSTRUCTIONS

be-form is a sew in foam stabilizer/batting ideal for bag making, giving them shape and stability.

It's soft and formable, easy to stitch, and needle friendly.

Consisting of PU foam sandwiched between two layers of napped tricot, it´s soft, pliable and easy to sew. Can be machine washed at 30 °.

In the fusible version, be-form F1, the first thing to keep in mind is the quality and composition of the fabric you are using. All 100% cotton fabrics are suitable. If you have doubts about its behavior, you should make a preliminary test to confirm the fabric compatibility with the heat of the iron when it is fusing. Then, to apply, you should place be-form with the fusible side facing up and overlap the fabric, positioning it as desired. Next, with the iron in position 1.5 (Silk / Wool), gently wipe. If you find that it´s not adhering well, increase the temperature of the iron and use steam if necessary (iron temperature and steam usage will depend on the type of fabric you´re using and its weight). For best results, the fabric must be previously passed and showing no wrinkles or creases. Let cool completely and you can start working. For a excellent final result, iron in the areas which might have arisen some wrinkle or ripple.